ASG100 Series

Category:

Current transformer below 10kV

ASG100 Series

Model meaning

Model Code	ASG	100	38、42、50、60	A、B、C、F
Encoding content	Structure code	Standard width	Inner diameter dimension	Length code

Indoor ASG100 series epoxy resin cast insulated through-core current transformer is suitable for power measurement, current detection and relay protection within 10kV,24kV ring network cabinet and AC 50/60Hz.

Technical parameters

Products meet the standard GB20840.1, GB20840.2, IEC61869-1, IEC61869-2

If users have special requirements, they can be determined after consultation with our company.

The above technical parameters are not the final technical commitment, please confirm our technical personnel shall prevail.

Product Information

Product Description

Conditions of use

Installation location: indoor.

Ambient temperature:-25 ℃ ~ 40 ℃, daily average temperature is not more than 30 ℃.

Altitude: ≤ 1000m, higher altitude can be selected as required.

Humidity: The maximum relative humidity at room temperature is 95%.

There shall be no violent vibration or collision at the installation site.

Structural Overview

Wear heart type, totally closed. Epoxy resin cast insulated current transformer.

The primary terminal is identified as P1, and the secondary terminal is identified as 1S1-1S2,2S1-2S2,3S1-3S2. This model has 6 secondary terminals and supports up to 3 secondary windings.

Technical Data

The installation site is free of gas, steam, chemical deposition, explosion and corrosive media that seriously affect the insulation of the transformer.

Power frequency withstand voltage between secondary windings and grounding 3kV/1min.

Other requirements shall be in accordance with GB20840.1, GB20840.2, IEC61869-1 and IEC61869-2.

Application Case